| Customization: | Available |
|---|---|
| After-sales Service: | Permanent Service |
| Certification: | CE |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Parameter | Value |
|---|---|
| Product Name | I3200-A1 |
| Ink Type | AQ Ink |
| Dimensions (mm x mm x mm) | 69.1 x 59.4 x 35.6 |
| Weight (g) | 82 |
| Nozzle Count | 3200 |
| Nozzle Pitch (inch) | 1/300 (same column) |
| Nozzle Columns | 8 |
| Maximum Supported Ink Color Count | 4 |
| Resolution | 300npi/1 column, 600npi/2 columns |
| Effective Printing Width (mm) | 33.8 |
| Ejection Frequency (kHz) | 43.2 (single dot), 21.6 (multi-dot) |
| Ink Drop Volume (pl) | 3.8-6-12 (9.4) |
| Corresponding Ink Viscosity (mPa·s) | 3-4 |
Precautions When Replacing the Print Head
COMMODITY PARAMETER
01
After receiving the print head purchased in our store, it is unnecessary and dangerous to use a syringe to inject water to test for clogging. Firstly, if the print head gets wet and you turn on the power without drying it, it may cause light burns or severe damage to the circuit board. Secondly, the print heads sold in our store have been strictly tested and checked by the factory before shipment, and they are shipped with protective liquid. Injecting water into the print head with a syringe not only washes away the protective liquid but also, due to the pressure from your hand, can cause air blockage in the print head, leading to no ink output.
02
The surface of the print head is very fragile and must not be bumped. Always protect it well. Its surface is an aluminum sheet, and the inner layer is coated with a crystal oscillator and very thin ink tubes. Any bump can cause it to dent, deform, or even break, rendering the print head useless.
03
When installing the print head, be careful and make sure to disconnect the power first and install it in place. After installation, gently push the carriage left and right to check for smoothness. Do not turn on the power until you are sure the print head is in place. If the print head is not in place, the carriage movement can easily break the print head, but you will feel it and can control the situation.
04
When connecting the cable, do not bring ink onto it and ensure good contact with the socket without touching the pins. Otherwise, it can cause short circuits and damage the print head.
05 The steel shaft should also be clean and smooth. You can use a tissue to stick some lubricating oil and wipe it. Do not directly add oil to the shaft, as excess oil will flow to the nozzle and cause damage.
06 After ensuring that the machinery and circuits are correct, it is time to check the water path. First, check if the ink cartridge has enough water; secondly, check if the small cleaning blade and ink pump are dirty.
07 The newly installed nozzle may contain air, so it will not print normally immediately. Only when the air in the nozzle is completely expelled can it print straight lines normally. First, you can use intermittent cleaning (cleaning twice at a time, then stopping for 30 minutes before cleaning again) multiple times. Excessive cleaning can cause the cleaning pump to accumulate ink, which will not only cause printing color mixing and ink leakage but also waste ink. Secondly, you can print more images to allow the nozzle to expel air during work. Thirdly, if the machine has already drawn out the waste ink tube, you can first disconnect the power, then use a syringe with a rubber tube to draw out the waste ink tube until 3-5ML of ink is drawn out, and then turn on the machine and use the machine's normal cleaning function once. This method artificially expels the air in the nozzle, but the side effect is that it can easily cause the cleaning pump to accumulate ink.
Special Reminder: There are many things that need attention when it comes to the nozzle, so non-professionals blindly replacing it can easily cause damage. Therefore, there is an industry rule that the nozzle is not covered by warranty. If you are not familiar with the machine, it is recommended to find a professional to replace the nozzle to avoid unnecessary loss and trouble!
Shipment Services:
){kind=link}